About Us Documentation

Contact Site Map




Tk_MaintainGeometry(3)Tk Library Procedures                   4.0



Tk_MaintainGeometry, Tk_UnmaintainGeometry - maintain geometry of one window relative to another


#include <tk.h> Tk_MaintainGeometry(slave, master, x, y, width, height) Tk_UnmaintainGeometry(slave, master)


Tk_Window slave (in) Window whose geometry is to be controlled. Tk_Window master (in) Window relative to which slave's geometry will be con- trolled. int x (in) Desired x-coordinate of slave in master, measured in pixels from the inside of master's left border to the outside of slave's left border. int y (in) Desired y-coordinate of slave in master, measured in pixels from the inside of master's top border to the outside of slave's top border. int width (in) Desired width for slave, in pixels. int height (in) Desired height for slave, in pixels. _________________________________________________________________


Tk_MaintainGeometry and Tk_UnmaintainGeometry make it easier for geometry managers to deal with slaves whose masters are not their parents. Three problems arise if the master for a slave is not its parent: [1] The x- and y-position of the slave must be translated from the coordinate system of the master to that of the parent before positioning the slave. [2] If the master window, or any of its ancestors up to the Tk 1 Tk_MaintainGeometry(3)Tk Library Procedures 4.0 slave's parent, is moved, then the slave must be repo- sitioned within its parent in order to maintain the correct position relative to the master. [3] If the master or one of its ancestors is mapped or unmapped, then the slave must be mapped or unmapped to correspond. None of these problems is an issue if the parent and master are the same. For example, if the master or one of its ancestors is unmapped, the slave is automatically removed by the screen by X. Tk_MaintainGeometry deals with these problems for slaves whose masters aren't their parents. Tk_MaintainGeometry is typically called by a window manager once it has decided where a slave should be positioned relative to its master. Tk_MaintainGeometry translates the coordinates to the coor- dinate system of slave's parent and then moves and resizes the slave appropriately. Furthermore, it remembers the desired position and creates event handlers to monitor the master and all of its ancestors up to (but not including) the slave's parent. If any of these windows is moved, mapped, or unmapped, the slave will be adjusted so that it is mapped only when the master is mapped and its geometry relative to the master remains as specified by x, y, width, and height. When a window manager relinquishes control over a window, or if it decides that it does not want the window to appear on the screen under any conditions, it calls Tk_UnmaintainGeometry. Tk_UnmaintainGeometry unmaps the window and cancels any previous calls to Tk_MaintainGeometry for the master-slave pair, so that the slave's geometry and mapped state are no longer maintained automatically. Tk_UnmaintainGeometry need not be called by a geometry manager if the slave, the master, or any of the master's ancestors is destroyed: Tk will call it automatically. If Tk_MaintainGeometry is called repeatedly for the same master-slave pair, the information from the most recent call supersedes any older information. If Tk_UnmaintainGeometry is called for a master-slave pair that is isn't currently managed, the call has no effect.


geometry manager, map, master, parent, position, slave, unmap Tk 2 Prepared by Ready-to-Run Software, Inc.


Email addresses listed on this site may  NOT be used for unsolicited commercial email.

Ready-to-Run Software, Inc Privacy Statement

Portions (c)Copyright, 1996-2005 by Ready-to-Run Software, Inc
(All rights reserved.)
212 Cedar Cove
Lansing, NY 14882
Phone: 607 533 UNIX (8649)
Fax: 607 533 4002

To return to the Ready-to-Run Software WinPak Table of contents please presshere